Feature:1. 313mm / 12.3in wheelbase perfectly matches the original RC car parts.2. Fun to assemble, RC model car door can open and simulate interior detail.3. Has excellent crash resistance, and can be removed for easy use.4. Making your RC car look more authentic, easy to install and disassemble.5. Can be updated and modified at will, make your RC car more attractive.Specification:Condition: 100% Brand NewItem Type: RC Car ShellMaterial: ABS Plastic Wheelbase: Approx. 313mm / 12.3inTotal Length: Approx. 500mm / 19.7inFront Width: Approx. 200mm / 7.9inRear Width: Approx.205mm / 8.1inFitment: Fit for 1/10 RC Car Fit for SCX10Fit for SCX10 II 90046 90047Assembly Instructions:1. Use B2 screws and M3 nuts on both sides and side doors to tighten them from inside.2. Tighten from inside with 11pcs 01 screws.3. One B1 screw and two C1 screws are used on both sides of the car, and 2pcs 01 screws are used on the roof of the car.4. Use 8pcs A1 screws to tighten the front guardrail on both sides of the wheel;The last one on both sides of the wheel front guardrail is fastened with an A2 screw;The rear guardrail on both sides of the wheel is fastened with 9pcs A1 screws.5. The front guardrail is secured from the rear with 4pcs C2 screws.Install it to the front and fasten the inside with 2pcs D1 screws and C2 screws.6. Car window are installed from the inside.7. Two headlights are installed from the inside of the car shell and fastened with a C2 screw for each.8. Two fog lamps are installed from outside to inside the car shell.Glue and fix from the inside.9. Install two heat dissipation holes, pay attention to the left and right directions.10. Install windshield wipers